How To Change Weed Eater Line

A weed eater, also known as a string trimmer, is a powerful tool used to cut grass and weeds in areas that are too tight for a lawnmower. To maintain your weed eater and keep it running efficiently, it is important to replace the line in the trimmer head when it becomes worn or frayed. Here is how to change the line in your weed eater.

First, shut off the engine and remove the spark plug wire from the spark plug. This will help prevent accidental starting of the engine while you are replacing the line.

Next, locate the trimmer head and remove it from the trimmer shaft. Most heads are held on securely with a bolt or locking nut. Use a socket wrench or adjustable wrench to loosen the head from the shaft and then remove it.

Once the trimmer head is removed, take out the old line and discard it. There are different types of trimmer line available, so select the correct size and type for your weed eater. Most trimmer heads will accept either round or square line, so be sure to select the right type for your trimmer head.

Once you have the new trimmer line, you will need to install it in the trimmer head. Start by feeding the end of the line through one of the eyelets in the trimmer head. Make sure the line is pulled tight as you feed it through. Then, wrap the line around the spool, starting at the other eyelet and winding the line in a clockwise direction. As you wind the line, be sure to keep it even and pull it tight to ensure that the line is wound properly.

Once the line is wound, you can trim off the excess with a pair of scissors. Then, reattach the trimmer head to the trimmer shaft. Be sure to tighten the bolt or locking nut securely. Finally, reattach the spark plug wire and you are ready to go.

Changing the line in your weed eater is a fairly simple process. By following these steps, you can easily replace the old, worn line in your trimmer head and get back to trimming your lawn or weeds. Now you know how to change the weed eater line in just a few simple steps.

Master how to quickly change out a weed eater string (string trimmer line) on a typical trimmer. Check out the All About Outdoor Power playlist for more on gas and electric trimmers,... How To Change Weed Eater Line Step- 1: Changing Lines To A Single Line Trimmer Step- 2: Change The Line In The Double Line Feeder Step- 3: Line Change In Speed Feed. Insert the tip of the strings and start wrapping the line. After you have reached the mark of 6’ of line, attach it to the retainer. Follow the same process for the second. This video demonstrates the best way to install new trimmer line or string to your Weed Eater or Trimmer. Most trimmers with the bump feed option have the same type of head.

EASIEST WAY TO STRING YOUR WEED EATER

How To Change Weed Eater Line. Stoney Ridge Farmer's "Quick Tips": HOW TO STRING YOUR WEED WHACKER. Hope you all enjoy this new series of quick how to videos here on the channel! Oregon Weed Eater String Link: amzn.to/2JU8GX0 Small Reel of Weed Eater String: amzn.to/2JWKNOg Support this Farm as a Channel Member: youtube.com/channel/UCQVGf64a6nqKhgR9eKCUY4A/join Support...

Pull the spool out and unravel the old wire, but note how the wire was attached to the spool. Cut off 20–25 feet (6.1–7.6 m) of replacement string and attach it to the spool the same. How to Replace Weed Eater Line: Method One For our first method of reloading line into our Stihl weed eater, we’ll use a convenient feature of the C 25-2 trimmer head. This feature.

Replacing a Weed Eater String (String Trimmer Line) | The Home Depot - YouTube

How to Change the Line | Weed Eater String | Replace Weed Wacker [2021]

Weed Eater Line ........................................................ amzn.to/3h2hg5r Bulk Line .................................................................... amzn.to/3x4bw1T All weed wackers are different, but it's the same basic concept to change the line. For my craftsman C3 19.2 weed eater you first remove the red cover, then...

Replacing a Weed Eater String (String Trimmer Line) | The Home Depot

Master how to quickly change out a weed eater string (string trimmer line) on a typical trimmer. Check out the All About Outdoor Power playlist for more on gas and electric trimmers, edgers, and blowers and sweepers: thd.co/2AmvQh7. #TheHomeDepot #HomeImprovement #DIY SUBSCRIBE to The Home Depot: thd.co/2iib0HE Shop for string trimmer line: ...

Restring a 2 sided spool on a string trimmer weed eater EASY!!

Restring a dual sided spool string trimmer weed eater String trimmer line on Amazon. amzn.to/2QHzo6x String trimmer on Amazon with good reviews. amzn.to/2OAzOdl This is a nice string trimmer, it uses to 2 strings on a dual spool, people may call them weedwhacker, weed eater, string trimmer, etc , but this is basically a machine that can be...

How To Change Weed Eater Line. Few types of weed eaters demand that you place them in a pre-stretched spool, but most weed eaters recommend a new string for. How to change the weed eater string/line in the Dewalt 60V max weed eater. Super easy and quick to do. Show more Show more How to Restring DeWalt DCST970 60 Volt.

How To Change Weed Eater Line.